Superior and Reliable Hardware

The core of the Keltron-iTAC solution is the Keltron- high tech GPS telematic device.The Keltron-iTAC device blends high end technology with cost effectiveness by assembling the US technology components in fully equipped Keltron Assembly plants. The Telematics devices ranges from the basic track & trace models to complex & complete vehicle telematics solutions powered by OBD2, RS232, Wi-Fi /Ethernet capabilities etc. The Keltron-iTAC models range from Ki-02 to KI-100. The devices possess industry acknowledged certifications like ARAI, PTCRB, Shock & Vibration certifications etc. With the help of cutting edge technologies and industry leading partners like Motorola, Siemens, Telit, Texas Instrumentation, Trimble etc we ensure the ordinary vehicles turn into “Intelligent Vehicles”.

Keltron- iTAC also provides the unique opportunity for OEMs to customize the Telematics solution for specific needs like number of Inputs, outputs, connectivity mode, Dual SIM, eCall, OBD Advanced capabilities, Connected Vehicles, V2X and V2V capabilities, Maintenance tracking etc.

OBD2 Tracker

  • Built in OBD-II interface for easy installation
  • 50 channel GPS, 2 Meter accuracy, Internal antenna, SMS and GPRS Data Support
  • Digital Inputs / Outputs, 20,000 Buffered messages during connectivity lost
  • Bluetooth (Optional), ACC Detection, Real-time Positioning & Tracking, Cross Geo-fence Alerts

Vehicle Immobilizer

  • Electronic security device for immobilizing vehicle during parking or on emergency situation like theft, route deviation etc.
  • Can be activated and reactivated using driver keypad or by remotely through SMS and application.
  • Built in intelligent microcontroller circuit ensures safety before immobilizing vehicle.

Mobile DVR and IR Camera

  • MDVR supports upto 4 IR camera and 1 TB HDD for video recording
  • Rugged and shock proof designed for vehicle environment, Optional WiFi and 3G option, H.264 Video Compression
  • VGA Output, Serial and Network Interface, 8 to 36 volt DC, Alarm input/output

Tracking and Telemetry

  • Built in OBD-II interface for easy installation
  • 50 channel GPS, 2 Meter accuracy, Internal antenna, SMS and GPRS Data Support
  • Digital Inputs / Outputs, 20,000 Buffered messages during connectivity lost
  • Bluetooth (Optional), ACC Detection, Real-time Positioning & Tracking, Cross Geo-fence Alerts
  • Broad Voltage Range Input

LMU-200

  • UDP Packet data and SMS, 12 and 24 volt vehicle systems, -156dBm Sensitivity, 9-32 VDC
  • Captive wire harness in 2 wire, 4 wire, 6 wire and 8 wire configurations
  • 1.84 x 3.3 x 0.78” (46.5 x 83.6 x 19.4mm) - without harness
  • Optional Lithium-Ion 200mAh or 1000mAh See technical specifications online for operational changes
  • Up to 2 fixed bias, optional 1-Wire Interface

LMU-700

  • GPRS/EDGE/HSPA, CDMA 1xRTT packet data, UDP and SMS, 12 and 24 volt vehicle systems
  • SMS, UDP packet data, 3 fixed bias/programmable bias, 1 internal VCC monitor
  • 7-32 VDC (momentary), 9-30 VDC (start-up, operating), weight is 2.6 oz, (74g) (internal)
  • Captive 8 wire harness, Internal (GSM,GPRS or HSPA variant only), External SMC or internal
  • External SMA (tamper monitoring, 3V) or internal

Fuel Level monitor

  • The device is used to monitor fuel level and send alerts when fuel pilferage is detected.
  • Device can be easily connected with existing vehicle fuel level sender.
  • Unit is connected with tracking device for real time monitoring.

Fuel Level Sensor

  • Sensor will be installed on fuel tank for getting high accuracy fuel level readings
  • The sensor is installed on fuel tank through a small hole by drilling the tank.
  • Sensor is connected with tracking device to monitor fuel in real time and alerts when fuel theft detected.

Camera

  • Real time JPEG image capturing.
  • JPEG image is taken real time and shown on application and stored for future reference
  • Image capture can be activated by user defined time.
  • IR is automatically activated during low visibility for clearer images.

Rugged TAB (Android)

  • MDVR supports upto 4 IR camera and 1 TB HDD for video recording.
  • Rugged and shock proof designed for vehicle environment
  • Optional WiFi and 3G option, H.264 Video Compression, VGA Output, Serial and Network Interface
  • 8 to 36 volt DC, Alarm input/output

Basic Tracking Device

  • Small in Size,50 channel GPS, < 5 Meter accuracy, Internal antenna,MS and GPRS Data Support
  • Digital Inputs / Outputs, 2,000 Buffered messages during connectivity lost, Tilt Detection
  • ACC Detection, Real-time Positioning & Tracking, Cross Geo-fence Alerts, Internal backup battery
  • Broad Voltage Range Input 7-32 VDC, GSM and Power

Advanced 32 Bit Tracking Device

  • 32 Bit MCU processing, 50 channel GPS, < 5 Meter accuracy, Internal / External Antenna
  • SMS and GPRS Data Support, Digital Inputs / Outputs, Analog input and serial interface, 3 Axis Accelerometer
  • ACC Detection, Real-time Positioning & Tracking, Cross Geo-fence Alerts, Internal backup battery
  • Broad Voltage Range Input 7-32 VDC, GSM and Power
feedback_mix.png